Skip to main content
Govee Outdoor Permanent Lighting Track by Lumeva — Metal Permanent Track System for Govee

Lighting tracks

Aluminum Track for Govee Permanent Outdoor Lights

From$190.00In stock · made to order, production starts once you approve your proof

Premium metal channel that hides the wiring and mounts your Govee permanent lights flush — color-matched to any color.

  • Fits Govee Pro & Original (v1 / v2 / Elite)
  • Hides all wiring — only the bulb shows
  • Aims every light straight down for an even glow
  • Solid extruded aluminum — not 3D-printed plastic

Mounting track only — your permanent lights are sold separately.

Govee model
Length

Most homes use 120–300 ft — front only ~120–150 ft, a full wrap ~200–300 ft.

Ships as 19 pieces · 51.3 ft — we round up to whole lengths at no extra cost, so you are never short.

Track color (required)

Standard colors

Tap a standard color, or browse the full RAL palette below.

Pick a standard color above, or browse the full RAL palette.

Screen colors are approximate. Your track is powder-coated to the official RAL standard, not the on-screen swatch.

A standard color or any RAL shade — your choice. Tap one of the standard colors above, or browse the full RAL Classic palette and pick the shade that matches your trim.

About two working days after you order, we email you a proof — your color, lengths and quantities — to check over and sign off. Coating can't be undone, so nothing is cut or powder-coated to order until you approve it, and the delivery window you pick at checkout runs from the day you do.

Quantity
1

1 × $190.00 = $190.00

Free standard shipping (excludes AK, HI, PR). Express calculated at checkout: Standard or Express (arrives 5 to 8 business days after it ships).

Add extras

Extra 10 ft of track · $38.00 / 10 ft

Color-matched to your order. Handy for a miscut or a little extra reach.

0

Corner & end caps (4-pack) — White · $10.37 / set of 4

For clean outside corners and cut ends. Not coated to your track color.

0

Corner & end caps (4-pack) — Black · $10.37 / set of 4

For clean outside corners and cut ends. Not coated to your track color.

0

Order with confidence

We confirm your exact color with you before anything is made — nothing goes into production until you approve it. Backed by our 2-year Lumeva warranty and a secure checkout.

  • Standard & express delivery
  • 2-year warranty
  • Secure card checkout
  • 60-day returns on standard items

Give your Govee permanent outdoor lights the professional, no-show finish they deserve. This premium aluminum track hides every wire and locks each light puck into a solid metal channel — engineered to outlast your lights, not the three years cheap 3D-printed brackets give you. Every puck sits flush and aims straight down for the clean, even cone of light Govee is known for. Powder-coated to any shade in the RAL Classic palette, so it disappears into your trim by day and shows only the light at night. Fits Govee Pro and Original (v1 / v2 / Elite).

Track

  • Color-matched aluminum track (to your chosen length)
  • 4× Corner caps (white or black)
  • 4× End caps (white or black)

All of this ships with your order at no extra cost. Need more for a longer run or an awkward corner, you can add spares at checkout.

Material
Extruded Aluminum
Compatibility
Govee Pro / Original (v1, v2, Elite)
Color Options
Any color (RAL, SW, custom)
Lengths
25–600 ft
Finish
Weatherproof powder coat
Installation
Two-piece screw base + snap cover
Caps included
4 corner caps + 4 end caps, free

  • Fits Govee Pro & Original (v1 / v2 / Elite)
  • Hides all wiring — only the bulb shows
  • Aims every light straight down for an even glow
  • Solid extruded aluminum — not 3D-printed plastic
  • Color-matched to any color — RAL, SW, or custom
  • Cuttable with a simple saw to fit corners
  • Two-piece design: screw the base, snap the cover
  • Includes 4 corner caps + 4 end caps free (add more at checkout)

Clips, caps and power supplies ordered on their own ship within 2–3 business days. Everything else is made to order: about two working days after you order we email a proof of the color and lengths, nothing is cut or coated until you approve it, and production starts the day you do. The delivery window below starts when it ships.

Standard shipping is free everywhere except Alaska, Hawaii and Puerto Rico. Two faster options (5 to 8 business days after it ships or 4 to 7 business days after it ships) are priced at checkout from your delivery address and order size, so you choose on price and arrival date.

60-day returns on unopened standard (in-stock) products in original packaging. Custom orders are final sale once you approve the production proof. They are refunded only if they arrive defective or we sent the wrong product. Damage in shipping, damage after delivery and a change of mind are not refunded.

How much do I need?

Estimate your track length

A rough guide to how much track most homes use. Measure the roofline you want lit, then round up to the next size — every home is different.

Your roofline, lit end to end
Half wrapFront & main rooflines
120–150 ft

The popular look — lights the front-facing roof. Fits most single-story and mid-size homes.

Full wrapAll sides
200–300 ft

Wraps the entire roofline for full coverage. Best for larger or two-story homes.

Bigger or highly detailed homes can go beyond 300 ft. Available from 25–600 ft.

How to estimate

1

Choose your rooflines

Front only, or the full perimeter of the house.

2

Measure & add up

Total the length, in feet, of each roof run you want lit.

3

Add ~10% & round up

Extra for corners and drops — then pick the next size up.

Estimates only — every home is different, and when you order a color match we confirm the details with you before production. Want us to measure it for you? Book a consult →

Can I fit this myself?

How it installs

Two extrusions and hand tools. The base screws to the soffit, the lights clip into the cover on the ground, and the cover snaps on last — which is the whole reason this goes up in a fraction of the time adhesive channel takes.

SoffitTrack Athe baseTrack Bthe coverhides wiringLights clip into Track B from behind, then B snaps up onto ASchematic — proportions are not to scale

Plays once — the order is the point.

  1. 1

    Track A screws to the soffit

    The only part that takes a fastener.

  2. 2

    Lights clip into Track B

    Done on the ground, not up the ladder.

  3. 3

    Track B snaps onto Track A

    No fasteners, no visible wire.

Step by step

  1. Walk the roofline first

    Pick your start point, your corners and your stopping point before anything comes out of the box. Knowing where the run ends is what stops you finishing on a two-inch offcut.

  2. Cut 3 inches off your first base piece — and keep the offcut

    Take 3 inches off the end of the first piece of Track A. Cut down one side at the mark, cut down the other side to match, then bend the end back until it parts. The short piece you have just removed is not waste: it is the guide you will use for the rest of the job.

    This cut is what staggers the run. Without it, base and cover break in the same place at every joint, nothing holds the line, and the run steps at the seam — visible from the curb and not fixable without pulling it down.

  3. Mark 3 inches off the wall, using that offcut

    Hold the 3-inch piece against the wall at each section and mark the far end of it. That is your setback, and using the offcut rather than a tape means every section lands on exactly the same distance with nothing to misread. A tape or a square works too if you have lost the piece.

    Three inches is the sweet spot. Closer and the light hugs the wall; further out and the pool goes round and soft.

  4. Chalk a line between your marks

    Working alone, drive a screw at the first 3-inch mark and hook the chalk line onto it — that frees both hands. Move the ladder to the next mark you made, pull the line to it, line it up and snap.

    Chalk the whole elevation rather than measuring at each piece. It is faster, and it is the difference between a line that reads straight from the curb and one that wanders.

  5. Fix Track A along the line

    Start with your shortened piece. Line up the FRONT edge of the track — the edge nearest you — on the chalk line, then drive your first fastener. Screws, a drill or a nail gun all work, and every piece after the first is full length. Where a soffit has wood planks standing proud, mount on top of them: Track A is profiled to clear them, and trying to fit between them is what puts a run out of line.

    The pre-drilled holes will not always land on solid soffit. When one does not, mark through the track where it does meet the soffit, drill your own hole at the mark, and fasten there instead of forcing the factory hole.

  6. Use a short offcut of cover as a joiner

    Cut a couple of inches off a piece of Track B and pop it over the joint between two base pieces before you fasten the second one. It holds the two ends together and in line while you drill, which is what keeps a long run straight.

  7. Pop the lights into Track B on the ground

    Push each light into its opening from behind — the slot grips it around the bulb and locks. Once it clicks it is not coming out.

    Doing this on the ground rather than up the ladder is the single biggest time saver on the job.

  8. Snap Track B onto Track A

    Press the cover onto the base along its length. It seats with a positive snap and takes no fasteners of its own. Because the base was started 3 inches short, each cover joint now lands mid-way over a base piece and the run reads as one continuous line with no gaps at the seams.

  9. Finish the ends and the corners

    Cap every open end and mitre the corners at 45° so two cuts close a 90° turn. Both can be made on site from offcuts of cover track, and we supply ready-made end and corner caps if you would rather not.

Govee Pro & Original Fitment · Architectural Track System

The Permanent Aluminum Channel for Govee Lights

Engineered specifically for Govee permanent outdoor lights. Lock each puck into structural 6063-T5 aluminum, eliminate messy sagging wires, and achieve a flawless architectural finish.

Locks Govee Pucks Firmly in Place
Secure Snap-In System

Locks Govee Pucks Firmly in Place

The extruded aluminum base screws directly into your fascia or soffit. Your square Govee light pucks snap securely into the front cover channel while standing safely on the ground, then the entire cover snaps on with a permanent locking joint. Lights never sag or blow loose.

  • Zero dangling cords or sagging wire spans
  • Precision fit for Govee Pro and Original (v1/v2/Elite) pucks
Disappears into Soffit & Fascia
Daytime Invisibility

Disappears into Soffit & Fascia

During the day, the ultra-slim aluminum channel integrates flush beneath your roofline eaves. No hanging cables, no yellowing plastic clips, and no tacky temporary fasteners.

  • Completely hides wires, splices, and connectors
  • No exposed wiring for an HOA to object to
Finished to Any RAL Classic Shade
RAL Color Finish

Finished to Any RAL Classic Shade

Powder-coated to order in the RAL Classic color you choose for your trim, stone, or soffit. A baked automotive-grade finish that resists fading, chipping, and UV breakdown season after season.

  • 200+ RAL Classic architectural colors
  • Baked-on exterior powder coat outlasts plastic brackets
Installation Simplicity

Four Steps to a Permanent Architectural Finish

Unlike clumsy one-piece channels that require wrestling heavy light strands overhead while driving screws, Lumeva’s two-piece extrusion divides the labor cleanly:

1

Mount Extrusion Base

Fasten the lightweight aluminum base tracks along your fascia or soffit using standard wood or metal screws.

2

Insert Lights on Ground

Press your Govee Pro or Original permanent light pucks into the precision-spaced punch holes in the cover plate while standing safely on the ground.

3

Snap Cover into Place

Bring the loaded cover up and press it into the mounted base. The dual spring-locks engage with a firm, permanent click.

4

Finish Corners & Caps

Snap on corner covers and terminate ends with sleek end caps, in white or black, for a clean architectural finish.

What’s Included in Every Order

Extrusion Base Tracks

Heavy-duty 6063-T5 aluminum base tracks pre-drilled for fast soffit or fascia fastening.

Snap-In Face Covers (Govee Compatible)

Powder-coated aluminum cover channels with CNC-punched apertures for Govee Pro & Original lights.

4 Corner Caps + 4 End Caps, Free

White or black caps for clean outside corners and cut ends. Add more at checkout if your roofline needs them.

2-Year Lumeva Track Warranty

Our warranty covers the track against manufacturing defects, including powder-coat degradation. Govee lights carry Govee’s own warranty, not ours.

On real houses

A selection of reviews from customers of this same track, collected under our previous brand name.

I bought the track for the govee elite to go

I bought the track for the govee elite to go around the perimeter of my pergola. The track fit perfectly on the bottom of the 2x12. I’m very happy with how it turned out.

Zach· United States· Aug 9, 2026

The Only Professional Way to Install Govee Permanent Lights

The Lumeva Metal Channel is a fantastic upgrade for Govee Permanent Lights. It makes the install cleaner, sturdier, and truly professional-looking. The metal build feels durable, the alignment is perfect, and the finished result is top-tier. Honestly, this is the only acceptable install method IMO if you want a polished, long‑lasting setup.

AL· United States· Jul 16, 2026

People in their 60 can do it

My husband and I did it super EZ to install once you know where to start and only ended cutting off 2 lights at the end.

G Fisher· United States· May 25, 2026

The Only Way To Put Up Govee Lights As Far As I’m Concerned

The Lumeva system arrived sooner than I expected and I was very impressed on the quality of the product and the look I, it was nicely finished and it was easy to put up and everything fit perfectly and looked even better.

Anonymous· United States· May 12, 2026

Great look

Loved the finish look of our Lumeva! Company was very easy to work with answered all my questions promptly. Was shorted a few tracks in the initial order but shipped them out quickly to us. Our neighbors have commented on how finish our job looks too!

SuzG· United States· May 12, 2026

Love Lumeva

Track system was easy to install. Made for a clean installation of my Govee light system!

Project John· United States· May 5, 2026
You may also like

More from the collection